Author Topic: Replacing outdrives  (Read 1724 times)

crtyler23

  • Guest
Replacing outdrives
« on: September 09, 2013, 08:17:27 am »
I am replacing the trs outdrives and was wondering if anyone knew the stock gear ratio of the drives used in a stinger 390x? The drives I have are pretty chewed up from corrosion..... Please email crtyler23@gmail.com

wannabe

  • Newbie
  • *
  • Posts: 18
Re: Replacing outdrives
« Reply #1 on: September 11, 2013, 07:50:44 pm »
The most common ratios on TRS is 1.5 to 1. Easy to confirm. Disconnect input shaft, turn input shaft 3 turns CAREFULLY marking a starting point. Prop should turn 2 times.

Wannabe