Chris Craft Stingers Forums

General Category => Chris Craft Stingers => Topic started by: 340mopar on October 22, 2015, 02:33:09 pm

Title: 260 SL (sun Lounge Cushion) specs
Post by: 340mopar on October 22, 2015, 02:33:09 pm
does anyone have the 260 SL (sun Lounge Cushion) specs?
I see some came in two and some in three sections... any help would be nice.

James
Title: Re: 260 SL (sun Lounge Cushion) specs
Post by: stinger390x on October 26, 2015, 07:26:05 pm
They are two-piece.
I don't know what your seat upholstery is, but I did my own upholstery work so if you need advice I would be happy to share.
(http://i113.photobucket.com/albums/n202/ve3lt/06f3_20.jpg)

This was my old 260 I had for many years before I bought my 390X
Title: Re: 260 SL (sun Lounge Cushion) specs
Post by: 340mopar on November 12, 2015, 10:27:24 am
awesome job!  I am looking at a 2-3 piece design on the deck (I have seen both)

what is the thickness of you deck Cushions did you use plywood, foam only...?
Title: Re: 260 SL (sun Lounge Cushion) specs
Post by: ccstinger on November 17, 2015, 06:10:37 pm
I have the original cushions on my 1984 312 and there is no plywood in them - they are all foam.
Title: Re: 260 SL (sun Lounge Cushion) specs
Post by: stinger390x on November 18, 2015, 07:07:22 pm
Thicjness varied and was also cut to form
difficult to answer......
Title: Re: 260 SL (sun Lounge Cushion) specs
Post by: 340mopar on December 03, 2015, 12:02:53 pm
nice.... what holds them in place ?

Velcro snaps ...

thickness may be based on density of foam?


Do you have dimensions for your patterns?