Chris Craft Stingers Forums
General Category => Chris Craft Stingers => Topic started by: crtyler23 on September 09, 2013, 08:17:27 am
-
I am replacing the trs outdrives and was wondering if anyone knew the stock gear ratio of the drives used in a stinger 390x? The drives I have are pretty chewed up from corrosion..... Please email crtyler23@gmail.com
-
The most common ratios on TRS is 1.5 to 1. Easy to confirm. Disconnect input shaft, turn input shaft 3 turns CAREFULLY marking a starting point. Prop should turn 2 times.
Wannabe